A Misty Morning

Early this morning as I emerged from my tent the forest was enveloped in a lovely light fog.

Looking NW from my tent.

Looking SW towards the build site from my tent.

Transience

These small fungi appear in the morning on the mulch path leading to my tent.  By the evening they are gone.

A New Chainsaw

We have had to remove a lot of trees to develop our build-site in the middle of a forest.  We started out with two  rather different chainsaws.  One was a light duty electric unit by Homelite.  The other was a gas-powered unit by Ryobi.  Of those two, I prefer the electric.  It is not as powerful as even a small gas chainsaw, but it is light in weight and very durable.  It can and has cut down a number of fairly large trees (12 inch trunks) and its low mass allows one to use it all day with minimal fatigue.  The biggest disadvantage of an electric chainsaw is the necessity of hauling a generator up into the forest to power it.  It's principle advantage is its reliability.  I've used and abused it, wore out or ruined a number of chains, bent the bar, and it is still going strong.  More power and portability prompted us to buy a gas chain saw by Ryobi.  It has proved to be a severe disappointment, however.  After only a couple of weeks of (intermittent) use, it became hard to start.  It gets ridiculous when you are expending more energy starting the saw than using it to cut wood.  Nick took up the challenge of trying to fix it but after spending many hours on it I decided that we had wasted enough time messing around with it and needed an alternative.  This led us to Woodstock Equipment Co. in Woodstock, Virginia.  They are one of our sources for parts for our Kubota tractor and excavator.  They are also an authorized Stihl dealer.  They fixed us up with a new MS290 Stihl chain saw. It's bigger and heavier than the Ryobi thing it is replacing.  It also costs twice as much and is made in Germany.  We hope it will prove to be dependable.  So far so good.

Our new chain saw along with safety gear for its operation.

Here I am, ready to cut some tree.

The Buildings Arrive

We ordered two 50 by 20 foot metal building kits back in the spring.  They are delivered to the job in pieces on a flatbed truck.  The delivery date was Tuesday, August 23.  We are by no means ready to erect these buildings yet and we pushed back the delivery date as far as we could (The manufacturer was willing to deliver them as early as mid-June.)  but decided to receive them now before the price of the steel went up.  The biggest challenge we faced was getting tons of steel pieces up to our land in the woods. There is no way a 50 foot flatbed semi could come up to our build site, get unloaded, and turn around.  We simply do not have a large enough flat area for such an operation.  Our only recourse was to unload the truck one quarter mile away on Orchard Lane and carry the materials up to our land parcel by parcel using smaller vehicles. We also had to unload the flatbed truck. We rented a huge all-terraine fork lift to unload the truck and used our smaller F450 truck as well as our Kubota B21 tractor outfitted with pallet forks to do this.  On the appointed day the rental company delivered the fork lift around noon.  Three hours later the truck with our building parts arrived.  We immediately got to work unloading so that we could finish before dark.  We got the truck unloaded by 7:00 PM but most of our steel was still sitting alongside Orchard Lane.  Fortunately, Orchard Lane is quite sleepy and the neighbors are understanding and there was no problem leaving it there overnight.  We weren't too worried about anyone taking it since there were few pieces that weighed less than several hundred pounds and many that were in the 1000 pound range so no one was likely to walk off with them.  On Wednesday morning we were still tired and sore from the previous day's efforts and we didn't get around to moving the steel up to our land until the afternoon.  The fork truck and tractor are slow vehicles and it takes quite a while to drive the quarter mile to the build site so this was all a time consuming process.  Also, some of the steel pieces were as long as 27 feet and could not be carried to our land on the fork trucks since the dirt track to the build site is not that wide.  These long (and heavy) pieces had to be loaded onto our F450 truck and driven up to the site and then unloaded.  All this takes some time and by the end of the second exhausting day we still did not have all the steel picked up off the road.  On Thursday our efforts continued and by the afternoon of the third day we had all the steel moved up to our land.  Our work was not yet over, however.  The pieces still had to be checked against the shipping manifold and sorted by building number.  Also, a number of the pieces were scattered around the property (in the road, for example) and had to be stacked and organized.  This process continued through Saturday, finally finishing up just as the rains from the far fringes of hurricane Irene were starting to bring some much needed rain.  So now we have our building parts.  Now we still have to finish the roads, excavate the foundations, pour the footers, etc. etc.

The rented fork lift arrives on a roll-off.

Nick spends some time practicing before the buildings arrive.

This vehicle is larger than we actually needed but it was the only thing that the rental company had available.

The truck with our building backs down Orchard Lane.

The unloading begins. 

It was a little tight for space but this was the best spot to unload.

Bit by bit we get the job done.

Once the flatbed is gone we move the pieces off Orchard Lane.
Some of the longer pieces had to be loaded onto our F450 to get to the build site.

These long boxes contain decorative trim metal and gutters.

The F450 with a load of long structural steel beams.

Nick got pretty good at driving this monster fork truck.

As dusk falls on the third day the checking and sorting of the pieces begins.

Some of the pieces temporarily ended up in the road.

We sorted the pieces by building.
Each of these piles contain the main structural beams for one of the buildings.

In flagrante delicto

One of the more curious insects we find in West Virginia is the stick insect.  They come in various species, some green in color and some brown.  Some are quite large.  The participants in the ménage à trois in the picture below are about 5 to 6 centimeters in length.

The Hapless Spider

We had this Venus Fly Trap at home in Kathryn's greenhouse.  We noticed that it wasn't catching any bugs so we thought we would take it out to West Virginia where there are plenty of bugs.  We were quite right.  It straight away got to gobbling and had soon filled all of its traps and proceeded in a growth spurt to produce more.  It was especially gratifying to watch it entrap a yellow jacket one afternoon.  One morning we noticed that it had caught a daddy-long-legs spider, or at least most of it.  As you can see in the picture below it couldn't quite get all the legs.

Hecho en USA

I bought a pallet fork attachment for the front of the B21 tractor from EveryThingAttachments.com.  It had to be custom built because all tractors are a little bit different and also ours is a bit on the old side.  I carefully provided the engineering measurements they needed to three place precision in hopes that they could build this thing accurately.  It was finally ready four weeks after the promised delivery date.  When I went to attach it to my tractor I was surprised to find that it did not fit.  It wasn't that it was wildly off the measurements I gave them, it was more that they were so sloppy in the implementation of the construction that things did not align like the should.  First of all, the spacing between the bosses for the pins was too small in one of the four pin locations because when they welded the hubs into place they did not take care to make them flush with the frame of the support.    Even more unforgivable was the fact that the two bosses on either side of the frame were not collinear.  What this means is that I could not pass the support pin through the two hubs.  This is ridiculous.  What kind of crap quality control does this outfit have?  If you cannot fit a pin through the holes, the entire unit is useless.  I wanted to send the whole pieces of junk back to RIck Reinhart with a nasty-gram saying how unimpressed I was, but I needed the darn thing immediately so I set about repairing a BRAND NEW piece of equipment.  I ground and filed the bosses down flush to the frame so that the swing arm of the tractor could fit between.  The misalignment of the two holes of the bosses was a bit more problematic.  If I were home in my shop I could have milled and lapped the ferrules into alignment.  But I was 120 miles from my shop in the woods!  I "solved" the problem by using some very old worn out pins that I had on hand.  With a little creative filing I could get the old worn out pins through the brand new misaligned bosses to make the thing work.   It's a bit wobbly but it functions. 

 A personal note:  I really, really want to buy stuff made here in the USA.  I try all the time to find good domestically made stuff.  However, I see no reason why I should pay top dollar for domestically made equipment if it is not going to be any better than the crap that comes from China or Mexico for less money.  Come on guys!  If we are going to be real players in the economic future of the world we got to be a lot better than the guys getting paid 50 cents an hour in the third world.  If we don't, pretty soon we too will be guys getting paid 50 cents an hour in the third world - and we'll have to learn Chinese or Spanish as well.

One of the poorly welded bosses showing the protuberance of the edge beyond the support bracket.

The repaired boss after grinding and filing in the field.

Beware this logo - these are the guys who actually made this piece of junk. 

Made in USA to "Hecho en China" standards.

I got it to work but I had to repair a BRAND NEW piece of equipment.